Previously Featured Builds

build

Coffin

Coffin

I've finished my PEARL phono stage. It is a lovely thing, very quiet and tranquil. I modified the circuit to… More...
build

Chris Cyrus

Chris Cyrus

This is my first Pass DIY project. I decided to build the zen amplifier because of the pcb boards being… More...

The Kleinhorn Part 1 — Nelson Pass / 2004

33 years ago I decided to build a big horn system. Constructed in the dorm library over Christmas break, the result was dubbed The Claw, a straight exponential horn 9 feet long with a 42 Hz expansion curve and a 50 sq ft mouth. We mounted a JBL LE15A woofer in the throat and used a JBL 375 compression driver and horn for about 500 Hz on up. No matter where we pointed it, the cops showed up every time. I've always wanted to build a stereo pair capable of even lower frequencies, and these days I am fortunate enough… More...

Current Source Crossover Filters — Nelson Pass / 2004

In today’s marketplace, audio power amplifiers are conventionally viewed as voltage sources, delivering a given voltage at the output that is a multiple of an input voltage. To the extent that they are truly voltage sources, having a very low output impedance, they simply deliver whatever current happens to reflect the response of the loudspeaker to the defined output voltage. Recently I have been playing with current source power amplifiers that have high output impedances and deliver a specific current to the load in response to an input voltage. The voltage across the loudspeaker reflects its response to this defined… More...

Copyright © 2016 Pass Laboratories, Inc. All rights reserved

Telephone: 530.878.5350